String Trimmer Labours, Doesn't hold charge adequately

  • 1
  • Problem
  • Updated 6 years ago
  • Acknowledged
Archived and Closed

This conversation is no longer open for comments or replies and is no longer visible to community members. The community moderator provided the following reason for archiving: out of date

I purchased an Ego 56v Lithium Ion String Trimmer on May 13 and have used it approximately 8 hrs since then. The first 6 hrs went relatively well, although the battery has never lasted over 30-35 mins. 

During the last several times I've used it I have experienced problems: the motor seems to rev up and down (even if I am not doing anything strenuous) and labour. I have taken off the spool and housing and cleaned out any grass wound inside (to be required to take that apart after each usage is a design flaw). I have avoided tall grass and when I've cut grass over 8" tall I have made several passes. The machine continues to strain  and rev up and down anyway. The last two times I've used it the charge lasted between 17-20 minutes!

If this is how this machine is going to operate in the future this isn't a good omen. Do you have any suggestions? What do I do next to remedy the situation, and if I can't then what?
Photo of claire

claire

  • 162 Points 100 badge 2x thumb
  • frustrated

Posted 6 years ago

  • 1
Photo of Jennifer VandeWater

Jennifer VandeWater, Community Manager

  • 81,048 Points 50k badge 2x thumb
Official Response
Claire,  thanks for this post and your email.  This is not normal operation for your trimmer.  We emailed you privately for your contact information so that we can send you a replacement to make this right.  Thanks for reaching out to us.

This conversation is no longer open for comments or replies.