Storage method for string trimmer

  • 2
  • Idea
  • Updated 3 years ago
  • Implemented
  • (Edited)
I have a storage shed for gardening equipment.  After looking over the trimmer, I figured the best bet was to hang it from the indentation formed from the head and shaft.  I used a piece of antenna wire, covered with tubing to prevent scratching the trimmer.   A couple of eye-bolts attached to the 2x4's and all that was left was to crimp the wire.  I double crimped just in case one crimp loosens.  I don't want the trimmer to fall and get damaged.


Photo of Dave .

Dave .

  • 21,706 Points 20k badge 2x thumb

Posted 3 years ago

  • 2
Photo of SCDC

SCDC, Champion

  • 54,538 Points 50k badge 2x thumb
Dave, that's a WIN.  Thanks for the pick!
Photo of Dean D

Dean D

  • 492 Points 250 badge 2x thumb
If you don't have the resources for the cable and crimps I think a rubber bungee cord hooked to a couple of eye screws should work too.