Pole Saw Sprocket Cover

  • 4
  • Idea
  • Updated 2 months ago
  • Under Consideration
EGO should consider offering an all metal Pole Saw Sprocket cover, as an upgrade, or better yet, putting it on the pole saw as original equipment.  The light duty plastic one may hold up, if one is cutting twigs, but bigger limbs, can easily take chunks out of the plastic cover.  I am going to have to fabricate a metal shield, for the cover, or continue purchasing $15 replacement covers.  I really like the pole saws cutting speed, and the tool in general, but the plastic sprocket cover, and the temperamental chain oiler, are serious dings to any recommendation I may provide.
Photo of Randy Breitenfeldt

Randy Breitenfeldt

  • 100 Points 100 badge 2x thumb

Posted 1 year ago

  • 4
Photo of William E Hanson

William E Hanson

  • 20,370 Points 20k badge 2x thumb
Randy, thanks for the heads up; I'm a light user, so haven't experienced this.
Photo of Jason Harris

Jason Harris

  • 152 Points 100 badge 2x thumb
This is a concern of mine as well, but I haven't broken a cover yet. 
Photo of Keith

Keith

  • 82 Points 75 badge 2x thumb
Absolute need. Cheap plastic cover gets torn up if chain displaces from bar. EGO products are great, the pole saw is a wonderful tool, shouldn’t cheap out on this cover. Also, the hex nut and drive screw tool is easily lost if cutting in brush, the band to retain it should be at the handle, not the saw end. Lost mine, cannot find how to replace.
Photo of Adam Neusbaum

Adam Neusbaum

  • 790 Points 500 badge 2x thumb
While using the pole saw this evening up in a boom lift the chain came off twice. Going from tool-less chainsaws to the required hex/flat-head driver is not fun. Just imagine if the pole-saw had those same great features.

Photo of Adam Neusbaum

Adam Neusbaum

  • 790 Points 500 badge 2x thumb


As a quick remedy to encourage the chain to not walk off the sprocket I added a plastic flange behind the washer. It stayed on longer this time; that is until the snap ring came off. Game over.
Observe the size of this retainer washer and compare it to the chainsaw. Also, the chainsaw cover is made from a more rigid plastic & likely assist in preventing the chain from coming off the edge of the sprocket.