pole saw oiling

  • 1
  • Question
  • Updated 9 months ago
  • In Progress
How do I check to make sure chain is oiling correctly, and if not how to fix?
Photo of Thomas Tanton

Thomas Tanton

  • 72 Points

Posted 9 months ago

  • 1
Photo of Paul Christenson

Paul Christenson

  • 7,208 Points 5k badge 2x thumb
This is the old school version of checking...:)
https://www.youtube.com/watch?v=foBPmSEqR6U
(Edited)
Photo of Frank Woodbery

Frank Woodbery

  • 3,406 Points 3k badge 2x thumb
Old school works! I find some dry area of bark or a little piece of cardboard would do for the splatter test.
Photo of Blue Angel

Blue Angel, Champion

  • 178,548 Points 100k badge 2x thumb
That old school method probably works, but if you happen to have a saw where the chain speed is lower you may not get oil flinging off the end even at its high-speed. I have not tried this with my ego saw so I can’t comment whether or not it works.

If the chain has visual amounts of oil on it, or enough oil that your fingers get oily touching the side of the chain it’s probably getting adequate lubrication. Another thing to watch for while cutting, be sure that the chain is not burning the wood. Burn marks in the wood can be an indication of poor chain lubrication, but can also mean your chain is dull.