Guide Bar Sprocket Maintenance for Chain Saw

  • 1
  • Question
  • Updated 4 years ago
  • Answered
  • (Edited)
For the EGO Chainsaw, the manual states "..the guide bar has a sprocket at its tip.  The sprocket must be lubricated weekly with a grease syringe to extend the guide bar life. Use a grease syringe to lubricate weekly with chain oil by means of the lubricating hole (Fig. 38)...".

By "chain oil", is it referring to the same bar and chain oil we pour into the chainsaw's oil tank (e.g. the "OREGON bar and chain oil" recommended by the manual)?
Photo of JoeJ

Joe

  • 610 Points 500 badge 2x thumb

Posted 4 years ago

  • 1
Photo of Jennifer VandeWater

Jennifer VandeWater, Community Manager

  • 80,868 Points 50k badge 2x thumb
Official Response
Hi Joe, yes, use the same bar and chain oil as used in the chainsaw's oil tank.