First Mow of the Year NEED HIGH LIFT BLADE!

  • 6
  • Problem
  • Updated 2 years ago
  • Solved
  • (Edited)
Archived and Closed

This conversation is no longer open for comments or replies and is no longer visible to community members. The community moderator provided the following reason for archiving: duplicate

Well that was a beotch.  Grass still damp and too darn tall.  Mower kept red lighting on me when pushed.  Used the "mulch plug" and there's grass everywhere.  Had to stop and charge my 7.5 battery midway.  (Usually does both front and back with power to spare.

I'm a real ego fan and have had nothing but good to say about their mowers, but today I wished I still had my Honda to do that first mow thing.

Ease of mowing is probably the primary draw of this mower, but today was NOT easy. 

Leaves everywhere, and I'm about to drop an F-Bomb on this High Lift Blade THEY KEEP PROMISING EARLY SPRING.  WTF?????  I really needed it today because me and my son had to go over the whole back lawn and pick up leaves that were below the tips of the grass,.

WHERE IS IT EGO?????????????????????????????????????????????????

New products coming out, how about taking care of the ones we already have???  I'm far from the only person disappointed in lack of lift - that part of this mower in a huge disappointment - why don't you fix that by putting out the blade they've had in Europe for a long time???

This is ridiculous!

Photo of bloomz

bloomz

  • 13,378 Points 10k badge 2x thumb

Posted 2 years ago

  • 6
Photo of (a)Typical Engineer

(a)Typical Engineer

  • 26,452 Points 20k badge 2x thumb
What kind of grass were you mowing, and what setting did you have the mower at? 

The few times I've tried to mow damp/wet grass has been frustrating, and a mess.  I usually wait until a nice sunny day, if nothing else, it makes post-mow clean-up much easier.
Photo of Tom_Stolze

Tom_Stolze

  • 326 Points 250 badge 2x thumb
From my research the High Lift Blade is for bagging, it will not help when mulching...The bottom line, raise it up all the way, only cut 1/2 the width of the mower and if you can in the future, don't let your grass get so tall.
Photo of bloomz

bloomz

  • 13,378 Points 10k badge 2x thumb
Sunny days are rare in Oregon, a couple a week.  And I don't know what kind of grass I have - the green kind!
Photo of Steve Valdes

Steve Valdes

  • 6,114 Points 5k badge 2x thumb
that's the good kind ;-))
Photo of SCDC

SCDC, Champion

  • 53,726 Points 50k badge 2x thumb
wet glass will dull a blade... sharpen often!
Photo of Jacob

Jacob

  • 64,368 Points 50k badge 2x thumb
No. I was making fun of you lol
Photo of Jacob

Jacob

  • 64,368 Points 50k badge 2x thumb
Ugh. I c now. Mowerror
Photo of David HD

David HD, Champion

  • 34,492 Points 20k badge 2x thumb
I thought you "created" a new word for us Jacob.

Mowerror = means error in the way you mow your grass
Photo of SCDC

SCDC, Champion

  • 53,726 Points 50k badge 2x thumb
I have a hard time cutting my glass
Photo of David HD

David HD, Champion

  • 34,492 Points 20k badge 2x thumb
Lol
Photo of Blue Angel

Blue Angel, Champion

  • 178,590 Points 100k badge 2x thumb
Bloomz, if you're mulching your grass the high lift blade will likely make the situation worse. If your grass is overgrown and wet, you might need to change to bagging for the first cut until it's under control, in which case the HL blade would likely help. ;-)
Photo of bloomz

bloomz

  • 13,378 Points 10k badge 2x thumb
Actually Blue - I'm just hoping it will help to suck the leaves up...I know I should have bagged today but there was too damn much grass!
Photo of Jacob

Jacob

  • 64,368 Points 50k badge 2x thumb
Then you would have to bag it or side discharge it because you can have the lift of a jet engine but if there isn't any were for it to go, no suction is created.
Photo of Steve Valdes

Steve Valdes

  • 6,114 Points 5k badge 2x thumb
Here's my 2 bits.
High, damp grass is the biggest challenge we can face, especially if damp leaves are mixed in. Unfortunately, I don't think a high lift blade would have made a big diff under those conditions. I would rake up the damp leaves first, then cut on high, then cut again a notch lower, bagging all the way. I would only mulch in dry conditions when not cutting move than 1" of the grass blade. Also, best to rake up those leaves as soon as possible in the fall so that they don't smother the grass over winter. I am interested to see how the high lift blade performs for bagging purposes but I am really looking forward to a new improved 21" mower that can mulch as well as the original 20". Maybe next year?
Photo of SCDC

SCDC, Champion

  • 53,726 Points 50k badge 2x thumb
Hi Brad,

FYI, I just use the finger across the middle.  If it stays balanced, good enough for me.  Been going that all of my life without a problem.  And I have to do a lot of grinding to my blades at times because of all of the small stuff it grinds up.  :).  In the spring it sometimes sounds like a chipper/vac under there.
Photo of Blue Angel

Blue Angel, Champion

  • 178,590 Points 100k badge 2x thumb
Any significant imbalance in the blade will result in vibration from the mower. If it's running smooth you're good to go. Check the balance every 2-3 sharpenings or so, unless you've taken a ton of material off to straighten out a gouge.
Photo of Brad Carey

Brad Carey

  • 2,230 Points 2k badge 2x thumb
Thanks for the tips, you all. Regardless of whether or not I take the blade off, it's going to be much easier and quicker than sharpening my reel mower. I had to take the wheels off, swap the gears, put on the grinding compound, put it back together, run it round for 10-15 min, then do the process again minus any additional compound.
Photo of Blue Angel

Blue Angel, Champion

  • 178,590 Points 100k badge 2x thumb
What a pain in the reel.

Yuk yuk.
Photo of bloomz

bloomz

  • 13,378 Points 10k badge 2x thumb

OK we've established that sharpening helps, but steering the topic drift back on course.....

WHERE IS THAT DAMN HIGH LIFT BLADE, EGO??????????

HELLO?  ANYBODY HOME???


To reiterate - this is ridiculous.


Photo of Jennifer VandeWater

Jennifer VandeWater, Community Manager

  • 80,888 Points 50k badge 2x thumb
We hear you loud and clear. Until this blade is available in North America, we are closing this thread. Thank you for all of your feedback.

This conversation is no longer open for comments or replies.